Blue screen death error 0x00000003 in Windows 10/8/7

Error 0x00000003 in windows 10 or any previous Windows operating system is also called as stop error or blue screen error. There are several scenarios your computer may get this error 0x00000003.

Assist image

How Can I Help you

scenario -1: When your computer running any old version of Windows operating systems like Window 8 or Windows 7 and you are trying to upgrade to window 10.

Scenario-2: When you update any software package from pending updates.

Scenario-3: This is a rare case where you see this blue screen stop error 0x00000003 in regular use.

More about Error 0x00000003in Windows 10/8/7:

Stop Errors are also called sometimes Blue screen (or)Black screen of Errors.These stop Errors are applicable to all version of Windows like 10/8/7…These Errors can be caused by both the software and hardware Issues and it can be difficult to troubleshoot the problem.Blue screen of death appears when Microsoft Windows Encounters a critical Error 0x00000003 from which it can’t recover, Usually the low level of software crashes and faulty hardware.To fix the Stop Error 0x00000003 in Windows, you will diagnose the problem by testing common culprits like RAM, Hard drive, and temperature.Depending on the problem you may need to run a virus scan, clean up the hard disk, perform a repair installation etc.,

 

error 0x00000003

Windows stop error 0x00000003

 

Windows Stop Error codes list (or) Blue screen of DeathDescription of Error codes
0XC000021A (or) STATUS_SYSTEM_PROCESS_TERMINATEDOccurs if there is a serious security problem with Windows. A subsystem, such as Winlogon or the CSRSS is compromised; or due to a mismatch in system files;
0X000000EA (or) THREAD_STUCK_IN_DEVICE_DRIVERould occur after you install a new video adapter or an updated (and poorly written) video driver.
0XC00000221 (or) STATUS_IMAGE_CHECKSUM_MISMATCHThis indicates a damaged page file; or disk or file corruption; or a faulty hardware. The error will indicate the exact nature and the name of the damaged system file.
0x000000D8 (or) DRIVER_USED_EXCESSIVE_PTESThis indicated that a poorly written driver is causing your computer to request large amounts of kernel memory.
0x0000007F (or) UNEXPECTED_KERNEL_MODE_TRAPMost likely due to a Hardware failure, like defective memory chips, mismatched memory modules, a malfunctioning CPU, or a failure in your fan or power supply are the probable reasons for this BSOD
0x00000077 (or) KERNEL_STACK_INPAGE_ERRORThe system has attempted to read kernel data from virtual memory (the page file) and failed to find the data at the specified memory address
0x0000003F (or) NO_MORE_SYSTEM_PTES cause of this relatively uncommon error may be an out-of-control backup program or a buggy device driver.
0x0000002E (or) DATA_BUS_ERRORdefective physical memory (including memory used in video adapters) is the most common cause of this Stop error
0x00000024 (or) NTFS_FILE_SYSTEMA problem occurred within the NTFS file-system driver. A similar Stop error, 0x23, exists for FAT32 drives. The most likely cause is a hardware failure in a disk or disk controller.
0x0000001E (or) KMODE_EXCEPTION_NOT_HANDLEDThe Windows kernel detected an illegal or unknown processor instruction, often the result of invalid memory and access violations caused by faulty drivers or hardware devices.
OX000000ED (or) UNMOUNTABLE_BOOT_VOLUMEif you get this message while updating TO Vista, check that you have compatible drivers for the disk controller and also re-check the drive cabling, and ensure that it is configured properly
0x000000C2 (or) BAD_POOL_CALLERA kernel-mode process or driver attempted to perform an illegal memory allocation. The problem can often be traced to a bug in a driver or software.
0x00000050 (or) PAGE_FAULT_IN_NONPAGED_AREAA hardware driver or system service requested data that was not in memory. The cause may be defective physical memory or incompatible software, especially remote control and antivirus programs.
0x0000000A (or) IRQL_NOT_LESS_OR_EQUALA kernel-mode process or driver attempted to access a memory location without authorization. This Stop error is typically caused by faulty or incompatible hardware or software.
0x000000D1 (or) DRIVER_IRQL_NOT_OR_EQUALProbably the most common BSOD ! Occurs when a driver has illegally accessed a memory location while NT is operating at a specific IRQL.

How to fix the Windows 10 Stop Error 0x00000003:

Boot in a safe Mode:

If Windows Wouldn’t start because of Blue Screen errors. In safe mode, Windows will only load the essential drivers.so if a driver recently installed is causing the Blue Screen of Error.Booting into safe mode is trying to fix the problem. As the computer is booting, Repeatedly press the F8 Key then Windows boot menu appears. This process is in a detailed way

  • Hold to shift and press F8 button upon startup to recovery mode
  • Then open the Window Select the Advanced repair option, Press Troubleshoot and select Advanced Options.
  • Click Windows Startup settings and press restart

 

Boot in safe mode

Boot in safe mode

Select a safe mode With a networking to boot into a stripped down version of Windows.This is a allow to access your Device Manager, The Internet, and Other System Tools.

Scan for malware:

Sometimes Viruses and malware are the root cause of Blue screen problem.These are will dig into your system registry and cause Instability. The buggy software very harmful and cause your computer to crash.If it can solve you have to install the latest anti-virus software and full fill the system scan to find anything that could be causing the problem.

Anti virus

Antivirus

Repair to Installation Windows:

This is an alternative way to complete the reinstalling Windows, as it only copies the system files to computer. This is useful if an essential file has become corrupt and is causing your computer to fail.

Repair Windows

Repair Windows

To perform a repair installation, Insert your Windows Disc and Boot menu from it.In the setup menu select a Repair installation.Windows will delete old ones and copy new ones.So you will not lose any personal data.

Roll Back your Drivers

A driver is a software that allows your computer to communicate with hardware.An incorrectly installed driver is often the cause of blue screen errors.Download the latest drivers for your computer’s hardware from the official manufacturer’s websites and install them.

Drivers

Drivers

  • Open the Device Manager and select My Computer after that press on properties.
  • Select the hardware that you want to expand the rollback. you may have to expand categories to find it.
  • After that right click on the Icon and select properties.Then click the driver tab and select Roll back driver and confirm that you want to roll it back.
  • Once your drivers have been rolled back. Then your computer to verify the error doesn’t occur again.Don’t update the Driver again because new versions are released.

Roll Back Windows Update:

If rolling back the driver did not fix the problem.Consider restoring to an older, Working installation of Windows.this will let you determine if the Windows update is responsible to the blue screen.

Windows update

Windows update

  • Open a system restore. you can find system restore in the search bar into the start menu.
  • open the program, and select a date from the calendar before you started experiencing Errors.
  • This will reset all of the updates and be setting to that date, Effectively removing the updates added afterward.
  • use this to determine if a specific Windows update is caused your malfunction.

Clear disk cleanup:

If Windows Doesn’t have enough space on the Disk it is installed on, it can cause system failures.Remove unnecessary files and programs.If you have less than 15% of your hard Disk free.

Disk cleanup

Disk cleanup

Apply new Updates and Drivers:

if Rolling Back Drivers and Updates did n’t fix the problem then installing the latest versions and Updates may fix your problem. Check your Windows Update program to see if there are any new system and Hardware Updates available.

Open the control panel through the start menu and search for Windows Update. Then it will be opened.

Windows Update

Windows Update

Reinstall Windows:

If you have tried all the above options without success.You may have to reinstall Windows.This will completely remove all of your system software and replace it with a new fresh system.Make sure that all of your Important Files backup before doing the reinstallation.As your hard drive will be formatted for the installation process.

Reinstallation

Reinstallation

Replace Damaged hardware:

If your Driver and update don’t solve your problem.you may need to remove and replace your Hardware. Replacing anything other than RAM and Hard drive can be difficult and expensive.

For More Info Microsoft Live chat support

Microsoft chat support, Microsoft live support, Microsoft live chat support, Microsoft support live chat, Microsoft live support chat, Live support chat, Windows support chat, Windows chat support, Windows tech support chat, Windows live support chat

 

Microsoft Outlook is not responding

Description Outlook not responding:

Microsoft Outlook is not responding due to stuck at processing (or) stopped working (or) freezes (or) hangs.If an Outlook not responding the screen says that then it can close for to fix the safe Mode on Outlook.After that, it can open normally to fix the problem.

outlook not responding

outlook not responding

Outlook is a personal information manager from Microsoft.It is developed by Microsoft corporation.Outlook is one of the Microsoft office suites.Microsoft outlook has replaced With previous Microsoft scheduling and programs.Versions of Microsoft Outlook include that Outlook for phones and tablets, Windows, Mac, office, MS-DOS like that.

Symptoms of Outlook not responding:

When you open the file or send an email  message in Microsoft outlook, then outlook  freezes or you got an error message

“Outlook not responding”

Causes of Outlook not responding:

  • You have not installed the latest updates
  • Outlook is used by another process
  • previously installed  add-ins with interfering with outlook
  • Your AppData folder is redirected to  another network location
  • Your mailboxes are too large.
  • you have to repair your office programs.
  • outlook data files become corrupted and damaged.
  • your user profile has become corrupted.
  • Another program conflicts with outlook.
  • your installed antivirus software is outdated.

How to fix Outlook not responding error:

Outlook in safe mode

1.First close all the tabs and also close outlook.

2.Open the command prompt and type the outlook.exe/safe and press enter then click yes for a confirmation message.

command prompt

command prompt

3.If it starts normally and it confirms the issue with add-ins.

 Repair & Update Office programs

1.Open the control panel and select programs and features

programs &features

programs &features

2.Then select if you want the selected the program and click Repair.

Repair

Repair

3.Then it automatically has done a process to repair the program.

4.Once the repair is completed then the program will be updated to the latest version.

Reduce Outlook Data file 

Outlook stores all the data within files having the extension with PST(.pst files ).when used with Exchange mail boxes.The data is stored within  OST files.If your outlook PST to OST file grows too large in size.They become prone to corruption and files damaged.

Create a new user profile

  • Got o the start menu at the bottom left corner of the screen and search control panel on the search box and click enter.
  • Then go to the User Accounts and family and click on it.
  • After that click on add or remove user accounts and then go to the create account and click k on it.
  • Create a name in the name box and then click on create the account then automatically created with you required profile name.
  • After that enter email address and password for the primary email account, you use in outlook and then follow the steps to create a profile.
  • Once the profile is created, on show profile dialog box, choose Prompt for a profile to be used.
  • Start outlook and choose your new profile.
  • In case you create a new profile can be solved your issue then go to the show profile dialog box delete the older profile.
outlook not responding

outlook not responding

Turn off Anti virus program

Anti virus software safeguards to your computer from all our threats.some of the products are designed such that they scan every outgoing and incoming email to your system to detect problems.This might cause normal problems with the normal functioning of outlook at times.your anti virus may flag some add-ins are untrust worthy and block them causing outlook to hang or crash.

  • Open the control panel through the start menu and turn off your antivirus.
  • Restart outlook and check.
  • If everything works fine, then you know where the problem was.
  • To keep using where the anti virus and outlook with out issues simultaneously, add outlook and it all add-ins to the list of trusted applications in the anti virus software.

I hope this was helpful for basic troubleshooting steps.In case the above methods don’t work then contact our technical support .then easily solve the troubleshooting issue.

For more details, Microsoft Live Assist

Microsoft chat supportMicrosoft live supportMicrosoft live chat supportMicrosoft support live chatMicrosoft live support chatLive support chat, Windows support chatWindows chat supportWindows tech support chatWindows live support chat, Microsoft Word not opening, Microsoft excel not responding, Outlook not responding

Microsoft excel not responding, Microsoft outlook is not responding, Outlook is not respondingMicrosoft word and excel not responding,

 

 

How to Resolve the Excel not responding in windows 7/8/10

Description of Excel not responding:

This article describes the Excel not responding. Microsoft Excel is a graphical method processing platform and it can allow the purpose of all users to type and save the document. It is helpful to all the operating system versions i.e to save the file by the users. Some times Excel not responding due to some cause of setup issues and files association.

excel not responding

 

Excel is a part of Office suite of products from Microsoft. Excel is available in Multiple platforms in addition to Windows and Mobile versions of Windows 10, Android, Ios are also available. Some file formats are applicable to the excel they are like that file extension and binary formats, XML document etc., Microsoft word ‘s native file format is denoted by .doc or .docx.Excel has some features and flaws like that templates, arts, macros etc.,

Symptoms of Excel not responding:

  • The file icon is blank or displays an incorrect image
  • The file does not open

Causes of Excel not responding:

  • Third party add-ins and plugins are troublemakers for Microsoft Excel.
  • Viruses and Malware infect can cause one of the excel application to malfunction.
  • A necessary file may be deleted or a file used by the office application was corrupted during the program crash.
  • some time computer’s hardware may be a fault.
  • The problem occurs when the association between the file and corresponding application is missing.

How to solve the Excel not responding:

1.Insert your document into another file:

  • Open the first document
  • place the cursor where you want the second document to be inserted
  • From the Insert tab, Text group click on the down arrow next to the object and choose text from the file.
  • Select the file to be inserted.
  • click on insert.
  • Use the save as command to save the combined document under a different name if you need to retain your original document.

2.Start Excel by using a switch:

  • Open the start menu and search for run window
  • Then type run in search box and press it
  • Open the run window then type the winword.exe in the command box and press it ok button.
  • Finally, open the excel file.
  • The Winword.exe file is located in the following folder by default

c:/program files/Microsoft office/office/excel

For example, if you want to start to excel and preventing the add-ins and global templates, type the following  in the open box in the quotation marks

“c:/program files/Microsoft office/office/winword.exe”/a

3.Delete the Excel data registry subkey

  • Close the all office programs
  • open the start menu and type the run window
  • open the run window and type the Regedit in the command box and click enter.
  • locate the following registry subkey, as appropriate for the version of the excel

HKEY_CURRENT_USER\Software\Microsoft\Office\version\Word\Data

  • Click Data, and then click Export on the File menu
  • Name the file wddata.reg, and save the file to the desktop
  • On the Edit menu, click delete and then click yes.
  • Exit registry editor.
  • start excel.

4.Restore the original excel data registry subkey:

  • Exit all Office programs
  • Double click on the wddata.reg icon on the desktop
  • click, yes, and then click ok.

5.Delete the excel options registry key

Excel not responding

 

  • open the Microsoft Excel and click on the office icon.
  • open the word options.Then open the new window.
  • Then open the new window and click on Advanced from the left menu
  • FInd the display section, here you can see show the number of recent documents option
  • Set the counter to zero and press ok button.
  • Now you can see the recent document list is empty.

6.Restore the original excel options with registry key

  • open the Microsoft excel and click on the office icon.
  • open the word options.Then open the new window.
  • Then open the new window and click on Advanced from the left menu
  • FInd the display section, here you can see show the number of recent documents option
  • Set the counter to the particular value and press ok button.
  • Now you can restore the options registry subkey.

7.Replace the normal.dot global template file

  • Exit all Office programs
  • open the start menu and search for the run window
  • Then type Run in the search box and then opened.
  • Then type cmd in the command box and press Enter.
  • At the command prompt type, the following commands and press Enter.

ren%userprofile%/Appdata/Roaming/Microsoft/Templates/Normal.dotmold normal.dotm

Go to C:\Users\user name\AppData\Roaming\Microsoft\Templates.

  • Make any change that you want fonts, margins, spacing, and other settings.you can use the same commands and features that you use to change the document. but remember that you any changes that you make a normal.dotm will be applied to the documents in the future.
  • At that command prompt type exit and press Enter
  • When you have finished then it can save the file.
  • Then start the excel.

8.Restore the original global template file

  • Exit all Office programs
  • open the start menu and search for the run window
  • Then type Run in the search box and then opened.
  • Then type cmd in the command box and press Enter.
cmd

cmd

  • At the command prompt type, the following commands and press Enter.

ren%userprofile%/Appdata/Roaming/Microsoft/Templates/old normal.dot Normal.dot

  • Then start Excel

9.Disable the startup folder add-ins

  • open the start menu and search regedit in the search box and press Enter.
  • Then open a popup window and click yes.
  • In the registry editor dialog box, you need to open the excel add-ins folder.

HKEY_current_user/software/Microsoft/office/excel/add-ins

  • Then expand the add-ins folder, and select the loader folder with the name of the add-in you need to disable Excel startup.
  • Go to the right pane of registry editor dialog box, you can see there is REG_DWORD file named Load Behaviour, please right click on it and select Modify from the context menu.
  • Then the Edit DWORD dialog box popup, please replace the number in the value data box with zero and then click the ok button.
  • close the registry dialog box.
  • When starting up your Microsoft Excel, the specified add-in is disabled without displaying on the ribbon.

10.Delete the com add-ins

  • Exit all Office programs
  • open the start menu and search regedit in the search box and press Enter.
  • Locate the following registry key
  • HKEY_current_user/software/Microsoft/office/Excel/add-ins
  • Click add-ins and click export on the file menu.
  • create a name to the file and save the file on the desktop
  • on the edit, menu clicks delete and click yes.
  • Exit registry editor and start Word.

11.Change the default printer

Excel not responding
  • Exit all Office programs
  • open the start menu and search regedit in the search box and press Enter.
  • Right click on Microsoft xps document writer and then click set as default printer.
  • Start the Excel.

I hope this was helpful for basic troubleshooting steps.In case the above methods don’t work then contact our technical support .then easily solve the troubleshooting issue.

For more details, Microsoft Live Assist

Microsoft chat support, Microsoft live support, Microsoft live chat support, Microsoft support live chat, Microsoft live support chat, Live support chat, Windows support chat, Windows chat support, Windows tech support chat, Windows live support chat

Microsoft excel not responding, Microsoft outlook is not responding, Outlook is not responding,Microsoft word and excel not responding,

 

[SOLVED] Windows Stop Error 0x0000000a in Microsoft-Windows 10/8/7

Error 0x0000000a in windows 10 or any previous Windows operating system is also called as stop error or blue screen error. There are several scenarios your computer may get this error 0x0000000a.

scenario -1: When your computer running any old version of Windows operating system like Window 8 or Windows 7 and you are trying to upgrade to window 10.

Scenatio-2: When you update any software package from pending updates.

Scenaro-3: This is a rare case where you see this blue screen stop error 0x0000000a in regular use.

More about Error 0x0000000a in Windows 10/8/7:

Stop Errors are also called sometimes Blue screen (or)Black screen of Errors.These stop Errors are applicable to all version of Windows like 10/8/7…These Errors can be caused by both the software and hardware Issues and it can be difficult to troubleshoot the problem.Blue screen of death appears when Microsoft Windows Encounters a critical Error 0x0000000a from which it can’t recover, Usually the low level of software crashes and faulty hardware.To fix the Stop Error 0x0000000a in Windows, you will diagnose the problem by testing common culprits like RAM, Hard drive, and temperature.Depending on the problem you may need to run a virus scan, clean up the hard disk, perform a repair installation etc..,

 

Error 0x0000000a

Error 0x0000000a

Windows Stop Error codes list (or) Blue screen of DeathDescription of Error codes
0XC000021A (or) STATUS_SYSTEM_PROCESS_TERMINATEDOccurs if there is a serious security problem with Windows. A subsystem, such as Winlogon or the CSRSS is compromised; or due to a mismatch in system files;
0X000000EA (or) THREAD_STUCK_IN_DEVICE_DRIVERould occur after you install a new video adapter or an updated (and poorly written) video driver.
0XC00000221 (or) STATUS_IMAGE_CHECKSUM_MISMATCHThis indicates a damaged page file; or disk or file corruption; or a faulty hardware. The error will indicate the exact nature and the name of the damaged system file.
0x000000D8 (or) DRIVER_USED_EXCESSIVE_PTESThis indicated that a poorly written driver is causing your computer to request large amounts of kernel memory.
0x0000007F (or) UNEXPECTED_KERNEL_MODE_TRAPMost likely due to a Hardware failure, like defective memory chips, mismatched memory modules, a malfunctioning CPU, or a failure in your fan or power supply are the probable reasons for this BSOD
0x00000077 (or) KERNEL_STACK_INPAGE_ERRORThe system has attempted to read kernel data from virtual memory (the page file) and failed to find the data at the specified memory address
0x0000003F (or) NO_MORE_SYSTEM_PTES cause of this relatively uncommon error may be an out-of-control backup program or a buggy device driver.
0x0000002E (or) DATA_BUS_ERRORdefective physical memory (including memory used in video adapters) is the most common cause of this Stop error
0x00000024 (or) NTFS_FILE_SYSTEMA problem occurred within the NTFS file-system driver. A similar Stop error, 0x23, exists for FAT32 drives. The most likely cause is a hardware failure in a disk or disk controller.
0x0000001E (or) KMODE_EXCEPTION_NOT_HANDLEDThe Windows kernel detected an illegal or unknown processor instruction, often the result of invalid memory and access violations caused by faulty drivers or hardware devices.
OX000000ED (or) UNMOUNTABLE_BOOT_VOLUMEif you get this message while updating TO Vista, check that you have compatible drivers for the disk controller and also re-check the drive cabling, and ensure that it is configured properly
0x000000C2 (or) BAD_POOL_CALLERA kernel-mode process or driver attempted to perform an illegal memory allocation. The problem can often be traced to a bug in a driver or software.
0x00000050 (or) PAGE_FAULT_IN_NONPAGED_AREAA hardware driver or system service requested data that was not in memory. The cause may be defective physical memory or incompatible software, especially remote control and antivirus programs.
0x0000000A (or) IRQL_NOT_LESS_OR_EQUALA kernel-mode process or driver attempted to access a memory location without authorization. This Stop error is typically caused by faulty or incompatible hardware or software.
0x000000D1 (or) DRIVER_IRQL_NOT_OR_EQUALProbably the most common BSOD ! Occurs when a driver has illegally accessed a memory location while NT is operating at a specific IRQL.

How to fix the Windows 10 Stop Error 0x0000000a:

Boot in a safe Mode:

If Windows Wouldn’t start because of Blue Screen errors. In safe mode, Windows will only load the essential drivers.so if a driver recently installed is causing the Blue Screen of Error.Booting into safe mode is trying to fix the problem. As the computer is booting, Repeatedly press the F8 Key then Windows boot menu appears. This process is in a detailed way

  • Hold to shift and press F8 button upon startup to recovery mode.
  • Then open the Window Select the Advanced repair option, Press Troubleshoot and select Advanced Options.
  • Click Windows Startup settings and press restart
Boot in safe mode

Boot in safe mode

Select a safe mode With a networking to boot into a stripped down version of Windows.This is a allow to access your Device Manager, The Internet, and Other System Tools.

Scan for malware:

Sometimes Viruses and malware are the root cause of Blue screen problem.These are will dig into your system registry and cause Instability. The buggy software very harmful and cause your computer to crash.If it can solve you have to install the latest anti-virus software and full fill the system scan to find anything that could be causing the problem.

Anti virus

Antivirus

Repair to Installation Windows:

This is an alternative way to complete the reinstalling Windows, as it only copies the system files to computer. This is useful if an essential file has become corrupt and is causing your computer to fail.

Repair Windows

Repair Windows

To perform a repair installation, Insert your Windows Disc and Boot menu from it.In the setup menu select a Repair installation.Windows will delete old ones and copy new ones.So you will not lose any personal data.

Roll Back your Drivers

A driver is a software that allows your computer to communicate with hardware.An incorrectly installed driver is often the cause of blue screen errors.Download the latest drivers for your computer’s hardware from the official manufacturer’s websites and install them.

Drivers

Drivers

  • Open the Device Manager and select My Computer after that press on properties.
  • Select the hardware that you want to expand the rollback. you may have to expand categories to find it.
  • After that right click on the Icon and select properties.Then click the driver tab and select Roll back driver and confirm that you want to roll it back.
  • Once your drivers have been rolled back. Then your computer to verify the error doesn’t occur again.Don’t update the Driver again because new versions are released.

Roll Back Windows Update:

If rolling back the driver did not fix the problem.Consider restoring to an older, Working installation of Windows.this will let you determine if the Windows update is responsible to the blue screen.

Windows update

Windows update

  • Open a system restore. you can find system restore in the search bar into the start menu.
  • open the program, and select a date from the calendar before you started experiencing Errors.
  • This will reset all of the updates and be setting to that date, Effectively removing the updates added afterward.
  • use this to determine if a specific Windows update is caused your malfunction.

Clear disk cleanup:

If Windows Doesn’t have enough space on the Disk it is installed on, it can cause system failures.Remove unnecessary files and programs.If you have less than 15% of your hard Disk free.

Disk cleanup

Disk cleanup

Apply new Updates and Drivers:

if Rolling Back Drivers and Updates did n’t fix the problem then installing the latest versions and Updates may fix your problem. Check your Windows Update program to see if there are any new system and Hardware Updates available.

Open the control panel through the start menu and search for Windows Update. Then it will be opened.

Windows Update

Windows Update

Reinstall Windows:

If you have tried all the above options without success.You may have to reinstall Windows.This will completely remove all of your system software and replace it with a new fresh system.Make sure that all of your Important Files backup before doing the reinstallation.As your hard drive will be formatted for the installation process.

Reinstallation

Reinstallation

Replace Damaged hardware:

If your Driver and update don’t solve your problem.you may need to remove and replace your Hardware. Replacing anything other than RAM and Hard drive can be difficult and expensive.

For More Info Microsoft Live chat support

Microsoft chat support, Microsoft live support, Microsoft live chat support, Microsoft support live chat, Microsoft live support chat, Live support chat, Windows support chat, Windows chat support, Windows tech support chat, Windows live support chat

Error 0x00000050,Error 0x00000024,Error0x000000d1,Error 0x0000001eError 0x000000ed,Error 0x0000007F,Error 0x000000c2,Error 0x0000000a,Error 0xc000021a

Windows Stop Error 0x000000c2 in Windows 7/8/10

Error 0x000000c2 in Windows 10 or any previous Windows operating system is also called as stop error or blue screen error. There are several scenarios your computer may get this error 0x000000c2.

scenario -1: When your computer running any old version of Windows operating systems like Window 8 or Windows 7 and you are trying to upgrade to window 10.

Scenatio-2: When you update any software package from pending updates.

Scenario-3: This is a rare case where you see this blue screen stop error 0x000000c2 in regular use.

More about Error 0x000000c2 in Windows 10/8/7:

Stop Errors are also called sometimes Blue screen (or)Black screen of Errors.These stop Errors are applicable to all version of Windows like 10/8/7…These Errors can be caused by both the software and hardware Issues and it can be difficult to troubleshoot the problem.Blue screen of death appears when Microsoft Windows Encounters a critical Error 0x000000c2 from which it can’t recover, Usually the low level of software crashes and faulty hardware.To fix the Stop Error 0x000000c2 in Windows, you will diagnose the problem by testing common culprits like RAM, Hard drive, and temperature.Depending on the problem you may need to run a virus scan, clean up the hard disk, perform a repair installation etc.,

 

Error 0x000000c2

Error 0x000000c2

Windows Stop Error codes list (or) Blue screen of DeathDescription of Error codes
0XC000021A (or) STATUS_SYSTEM_PROCESS_TERMINATEDOccurs if there is a serious security problem with Windows. A subsystem, such as Winlogon or the CSRSS is compromised; or due to a mismatch in system files;
0X000000EA (or) THREAD_STUCK_IN_DEVICE_DRIVERould occur after you install a new video adapter or an updated (and poorly written) video driver.
0XC00000221 (or) STATUS_IMAGE_CHECKSUM_MISMATCHThis indicates a damaged page file; or disk or file corruption; or a faulty hardware. The error will indicate the exact nature and the name of the damaged system file.
0x000000D8 (or) DRIVER_USED_EXCESSIVE_PTESThis indicated that a poorly written driver is causing your computer to request large amounts of kernel memory.
0x0000007F (or) UNEXPECTED_KERNEL_MODE_TRAPMost likely due to a Hardware failure, like defective memory chips, mismatched memory modules, a malfunctioning CPU, or a failure in your fan or power supply are the probable reasons for this BSOD
0x00000077 (or) KERNEL_STACK_INPAGE_ERRORThe system has attempted to read kernel data from virtual memory (the page file) and failed to find the data at the specified memory address
0x0000003F (or) NO_MORE_SYSTEM_PTES cause of this relatively uncommon error may be an out-of-control backup program or a buggy device driver.
0x0000002E (or) DATA_BUS_ERRORdefective physical memory (including memory used in video adapters) is the most common cause of this Stop error
0x00000024 (or) NTFS_FILE_SYSTEMA problem occurred within the NTFS file-system driver. A similar Stop error, 0x23, exists for FAT32 drives. The most likely cause is a hardware failure in a disk or disk controller.
0x0000001E (or) KMODE_EXCEPTION_NOT_HANDLEDThe Windows kernel detected an illegal or unknown processor instruction, often the result of invalid memory and access violations caused by faulty drivers or hardware devices.
OX000000ED (or) UNMOUNTABLE_BOOT_VOLUMEif you get this message while updating TO Vista, check that you have compatible drivers for the disk controller and also re-check the drive cabling, and ensure that it is configured properly
0x000000C2 (or) BAD_POOL_CALLERA kernel-mode process or driver attempted to perform an illegal memory allocation. The problem can often be traced to a bug in a driver or software.
0x00000050 (or) PAGE_FAULT_IN_NONPAGED_AREAA hardware driver or system service requested data that was not in memory. The cause may be defective physical memory or incompatible software, especially remote control and antivirus programs.
0x0000000A (or) IRQL_NOT_LESS_OR_EQUALA kernel-mode process or driver attempted to access a memory location without authorization. This Stop error is typically caused by faulty or incompatible hardware or software.
0x000000D1 (or) DRIVER_IRQL_NOT_OR_EQUALProbably the most common BSOD ! Occurs when a driver has illegally accessed a memory location while NT is operating at a specific IRQL.

How to fix the Windows Stop Error 0x000000c2:

Boot in a safe Mode:

If Windows Wouldn’t start because of Blue Screen errors. In safe mode, Windows will only load the essential drivers.so if a driver recently installed is causing the Blue Screen of Error.Booting into safe mode is trying to fix the problem. As the computer is booting, Repeatedly press the F8 Key then Windows boot menu appears. This process is in a detailed way

  • Hold to shift and press F8 button upon startup to recovery mode
  • Then open the Window Select the Advanced repair option, Press Troubleshoot and select Advanced Options.
  • Click Windows Startup settings and press restart
Boot in safe mode

Boot in safe mode

Select a safe mode With a networking to boot into a stripped down version of Windows.This is a allow to access your Device Manager, The Internet, and Other System Tools.

Scan for malware:

Sometimes Viruses and malware are the root cause of Blue screen problem.These are will dig into your system registry and cause Instability. The buggy software very harmful and cause your computer to crash.If it can solve you have to install the latest anti-virus software and full fill the system scan to find anything that could be causing the problem.

Anti virus

Antivirus

Repair to Installation Windows:

This is an alternative way to complete the reinstalling Windows, as it only copies the system files to computer. This is useful if an essential file has become corrupt and is causing your computer to fail.

Repair Windows

Repair Windows

To perform a repair installation, Insert your Windows Disc and Boot menu from it.In the setup menu select a Repair installation.Windows will delete old ones and copy new ones.So you will not lose any personal data.

Roll Back your Drivers

A driver is a software that allows your computer to communicate with hardware.An incorrectly installed driver is often the cause of blue screen errors.Download the latest drivers for your computer’s hardware from the official manufacturer’s websites and install them.

Drivers

Drivers

  • Open the Device Manager and select My Computer after that press on properties.
  • Select the hardware that you want to expand the rollback. you may have to expand categories to find it.
  • After that right click on the Icon and select properties.Then click the driver tab and select Roll back driver and confirm that you want to roll it back.
  • Once your drivers have been rolled back. Then your computer to verify the error doesn’t occur again.Don’t update the Driver again because new versions are released.

Roll Back Windows Update:

If rolling back the driver did not fix the problem.Consider restoring to an older, Working installation of Windows.this will let you determine if the Windows update is responsible to the blue screen.

Windows update

Windows update

  • Open a system restore. you can find system restore in the search bar into the start menu.
  • open the program, and select a date from the calendar before you started experiencing Errors.
  • This will reset all of the updates and be setting to that date, Effectively removing the updates added afterward.
  • use this to determine if a specific Windows update is caused your malfunction.

Clear disk cleanup:

If Windows Doesn’t have enough space on the Disk it is installed on, it can cause system failures.Remove unnecessary files and programs.If you have less than 15% of your hard Disk free.

Disk cleanup

Disk cleanup

Apply new Updates and Drivers:

if Rolling Back Drivers and Updates did n’t fix the problem then installing the latest versions and Updates may fix your problem. Check your Windows Update program to see if there are any new system and Hardware Updates available.

Open the control panel through the start menu and search for Windows Update. Then it will be opened.

Windows Update

Windows Update

Reinstall Windows:

If you have tried all the above options without success.You may have to reinstall Windows.This will completely remove all of your system software and replace it with a new fresh system.Make sure that all of your Important Files backup before doing the reinstallation.As your hard drive will be formatted for the installation process.

Reinstallation

Reinstallation

Replace Damaged hardware:

If your Driver and update don’t solve your problem.you may need to remove and replace your Hardware. Replacing anything other than RAM and Harddrive can be difficult and expensive.

For More Info Microsoft Live chat support

Microsoft chat support, Microsoft live support, Microsoft live chat support, Microsoft support live chat, Microsoft live support chat, Live support chat, Windows support chat, Windows chat support, Windows tech support chat, Windows live support chat,Error0x00000050,Error0x00000024,Error0x000000d1,Error 0x0000001eError 0x000000ed,Error 0x0000007F,Error 0x000000c2,Error 0x0000000a,Error 0xc000021a,Microsoft excel not responding, Microsoft outlook is not responding, Outlook is not responding, Microsoft word and excel not responding

 

Blue Screen of Death Error 0x0000007f in Windows 7/8/10

Error 0x0000007F in windows 10 or any previous Windows operating system is also called as stop error or blue screen error. There are several scenarios your computer may get this error 0x0000007F.

scenario -1:  When your computer running any old version of Windows operating system like Window 8 or Windows 7 and you are trying to upgrade to window 10.

Scenatio-2: When you update any software package from pending updates.

Scenaro-3: This is a rare case where you see this blue screen stop error 0x0000007F in regular use.

More about Error 0x0000007F in Windows 10/8/7:

Stop Errors are also called sometimes Blue screen (or)Black screen of Errors.These stop Errors are applicable to all version of Windows like 10/8/7…These Errors can be caused by both the software and hardware Issues and it can be difficult to troubleshoot the problem.Blue screen of death appears when Microsoft Windows Encounters a critical Error 0x0000007F from which it can’t recover, Usually the low level of software crashes and faulty hardware.To fix the Stop Error 0x0000007F in Windows, you will diagnose the problem by testing common culprits like RAM, Hard drive, and temperature.Depending on the problem you may need to run a virus scan, clean up the hard disk, perform a repair installation etc.,

Error 0x0000007f

Error 0x0000007f

Windows Stop Error codes list (or) Blue screen of DeathDescription of Error codes
0XC000021A (or) STATUS_SYSTEM_PROCESS_TERMINATEDOccurs if there is a serious security problem with Windows. A subsystem, such as Winlogon or the CSRSS is compromised; or due to a mismatch in system files;
0X000000EA (or) THREAD_STUCK_IN_DEVICE_DRIVERould occur after you install a new video adapter or an updated (and poorly written) video driver.
0XC00000221 (or) STATUS_IMAGE_CHECKSUM_MISMATCHThis indicates a damaged page file; or disk or file corruption; or a faulty hardware. The error will indicate the exact nature and the name of the damaged system file.
0x000000D8 (or) DRIVER_USED_EXCESSIVE_PTESThis indicated that a poorly written driver is causing your computer to request large amounts of kernel memory.
0x0000007F (or) UNEXPECTED_KERNEL_MODE_TRAPMost likely due to a Hardware failure, like defective memory chips, mismatched memory modules, a malfunctioning CPU, or a failure in your fan or power supply are the probable reasons for this BSOD
0x00000077 (or) KERNEL_STACK_INPAGE_ERRORThe system has attempted to read kernel data from virtual memory (the page file) and failed to find the data at the specified memory address
0x0000003F (or) NO_MORE_SYSTEM_PTES cause of this relatively uncommon error may be an out-of-control backup program or a buggy device driver.
0x0000002E (or) DATA_BUS_ERRORdefective physical memory (including memory used in video adapters) is the most common cause of this Stop error
0x00000024 (or) NTFS_FILE_SYSTEMA problem occurred within the NTFS file-system driver. A similar Stop error, 0x23, exists for FAT32 drives. The most likely cause is a hardware failure in a disk or disk controller.
0x0000001E (or) KMODE_EXCEPTION_NOT_HANDLEDThe Windows kernel detected an illegal or unknown processor instruction, often the result of invalid memory and access violations caused by faulty drivers or hardware devices.
OX000000ED (or) UNMOUNTABLE_BOOT_VOLUMEif you get this message while updating TO Vista, check that you have compatible drivers for the disk controller and also re-check the drive cabling, and ensure that it is configured properly
0x000000C2 (or) BAD_POOL_CALLERA kernel-mode process or driver attempted to perform an illegal memory allocation. The problem can often be traced to a bug in a driver or software.
0x00000050 (or) PAGE_FAULT_IN_NONPAGED_AREAA hardware driver or system service requested data that was not in memory. The cause may be defective physical memory or incompatible software, especially remote control and antivirus programs.
0x0000000A (or) IRQL_NOT_LESS_OR_EQUALA kernel-mode process or driver attempted to access a memory location without authorization. This Stop error is typically caused by faulty or incompatible hardware or software.
0x000000D1 (or) DRIVER_IRQL_NOT_OR_EQUALProbably the most common BSOD ! Occurs when a driver has illegally accessed a memory location while NT is operating at a specific IRQL.

How to fix the Windows Stop Error 0x0000007F:

Boot in a safe Mode:

If Windows Wouldn’t start because of Blue Screen errors. In safe mode, Windows will only load the essential drivers.so if a driver recently installed is causing the Blue Screen of Error.Booting into safe mode is trying to fix the problem. As the computer is booting, Repeatedly press the F8 Key then Windows boot menu appears. This process is in a detailed way

  • Hold to shift and press F8 button upon startup to recovery mode
  • Then open the Window Select the Advanced repair option, Press Troubleshoot and select Advanced Options.
  • Click Windows Startup settings and press restart
Boot in safe mode

Boot in safe mode

Select a safe mode With a networking to boot into a stripped down version of Windows.This is a allow to access your Device Manager, The Internet, and Other System Tools.

Scan for malware:

Sometimes Viruses and malware are the root cause of Blue screen problem.These are will dig into your system registry and cause Instability. The buggy software very harmful and cause your computer to crash.If it can solve you have to install the latest anti-virus software and full fill the system scan to find anything that could be causing the problem.

Anti virus

Antivirus

Repair to Installation Windows:

This is an alternative way to complete the reinstalling Windows, as it only copies the system files to computer. This is useful if an essential file has become corrupt and is causing your computer to fail.

Repair Windows

Repair Windows

To perform a repair installation, Insert your Windows Disc and Boot menu from it.In the setup menu select a Repair installation.Windows will delete old ones and copy new ones.So you will not lose any personal data.

Roll Back your Drivers

A driver is a software that allows your computer to communicate with hardware.An incorrectly installed driver is often the cause of blue screen errors.Download the latest drivers for your computer’s hardware from the official manufacturer’s websites and install them.

Drivers

Drivers

  • Open the Device Manager and select My Computer after that press on properties.
  • Select the hardware that you want to expand the rollback. you may have to expand categories to find it.
  • After that right click on the Icon and select properties.Then click the driver tab and select Roll back driver and confirm that you want to roll it back.
  • Once your drivers have been rolled back. Then your computer to verify the error doesn’t occur again.Don’t update the Driver again because new versions are released.

Roll Back Windows Update:

If rolling back the driver did not fix the problem.Consider restoring to an older, Working installation of Windows.this will let you determine if the Windows update is responsible to the blue screen.

Windows update

Windows update

  • Open a system restore. you can find system restore in the search bar into the start menu.
  • open the program, and select a date from the calendar before you started experiencing Errors.
  • This will reset all of the updates and be setting to that date, Effectively removing the updates added afterward.
  • use this to determine if a specific Windows update is caused your malfunction.

Clear disk cleanup:

If Windows Doesn’t have enough space on the Disk it is installed on, it can cause system failures.Remove unnecessary files and programs.If you have less than 15% of your hard Disk free.

Disk cleanup

Disk cleanup

Apply new Updates and Drivers:

if Rolling Back Drivers and Updates did n’t fix the problem then installing the latest versions and Updates may fix your problem. Check your Windows Update program to see if there are any new system and Hardware Updates available.

Open the control panel through the start menu and search for Windows Update. Then it will be opened.

Windows Update

Windows Update

Reinstall Windows:

If you have tried all the above options without success.You may have to reinstall Windows.This will completely remove all of your system software and replace it with a new fresh system.Make sure that all of your Important Files backup before doing the reinstallation.As your hard drive will be formatted for the installation process.

Reinstallation

Reinstallation

Replace Damaged hardware:

If your Driver and update don’t solve your problem.you may need to remove and replace your Hardware. Replacing anything other than RAM and Harddrive can be difficult and expensive.

For More Info Microsoft Live chat support

Microsoft chat support, Microsoft live support, Microsoft live chat support, Microsoft support live chat, Microsoft live support chat, Live support chat, Windows support chat, Windows chat support, Windows tech support chat, Windows live support chat,Microsoft excel not responding, Microsoft outlook is not responding, Outlook is not responding, Microsoft word and excel not responding

Error 0x00000050,Error 0x00000024,Error0x000000d1,Error 0x0000001eError 0x000000ed,Error 0x0000007F,Error 0x000000c2,Error 0x0000000a,Error 0xc000021a

Stop Error 0x000000ed in Windows 10/8/7

Error 0x000000ed in windows 10 or any previous Windows operating system is also called as stop error or blue screen error. There are several scenarios your computer may get this error 0x000000ed.

scenario -1: When your computer running any old version of Windows operating system like Window 8 or Windows 7 and you are trying to upgrade to window 10.

Scenatio-2: When you update any software package from pending updates.

Scenaro-3: This is a rare case where you see this blue screen stop error 0x000000ed in regular use.

More about Error 0x000000ed in Windows 10/8/7:

Stop Errors are also called sometimes Blue screen (or)Black screen of Errors.These stop Errors are applicable to all version of Windows like 10/8/7…These Errors can be caused by both the software and hardware Issues and it can be difficult to troubleshoot the problem.Blue screen of death appears when Microsoft Windows Encounters a critical Error 0x000000ed from which it can’t recover, Usually the low level of software crashes and faulty hardware.To fix the Stop Error 0x000000ed in Windows, you will diagnose the problem by testing common culprits like RAM, Hard drive, and temperature.Depending on the problem you may need to run a virus scan, clean up the hard disk, perform a repair installation etc.,

Error 0x000000ed

Error 0x000000ed

 

Windows Stop Error codes list (or) Blue screen of DeathDescription of Error codes
0XC000021A (or) STATUS_SYSTEM_PROCESS_TERMINATEDOccurs if there is a serious security problem with Windows. A subsystem, such as Winlogon or the CSRSS is compromised; or due to a mismatch in system files;
0X000000EA (or) THREAD_STUCK_IN_DEVICE_DRIVERould occur after you install a new video adapter or an updated (and poorly written) video driver.
0XC00000221 (or) STATUS_IMAGE_CHECKSUM_MISMATCHThis indicates a damaged page file; or disk or file corruption; or a faulty hardware. The error will indicate the exact nature and the name of the damaged system file.
0x000000D8 (or) DRIVER_USED_EXCESSIVE_PTESThis indicated that a poorly written driver is causing your computer to request large amounts of kernel memory.
0x0000007F (or) UNEXPECTED_KERNEL_MODE_TRAPMost likely due to a Hardware failure, like defective memory chips, mismatched memory modules, a malfunctioning CPU, or a failure in your fan or power supply are the probable reasons for this BSOD
0x00000077 (or) KERNEL_STACK_INPAGE_ERRORThe system has attempted to read kernel data from virtual memory (the page file) and failed to find the data at the specified memory address
0x0000003F (or) NO_MORE_SYSTEM_PTES cause of this relatively uncommon error may be an out-of-control backup program or a buggy device driver.
0x0000002E (or) DATA_BUS_ERRORdefective physical memory (including memory used in video adapters) is the most common cause of this Stop error
0x00000024 (or) NTFS_FILE_SYSTEMA problem occurred within the NTFS file-system driver. A similar Stop error, 0x23, exists for FAT32 drives. The most likely cause is a hardware failure in a disk or disk controller.
0x0000001E (or) KMODE_EXCEPTION_NOT_HANDLEDThe Windows kernel detected an illegal or unknown processor instruction, often the result of invalid memory and access violations caused by faulty drivers or hardware devices.
OX000000ED (or) UNMOUNTABLE_BOOT_VOLUMEif you get this message while updating TO Vista, check that you have compatible drivers for the disk controller and also re-check the drive cabling, and ensure that it is configured properly
0x000000C2 (or) BAD_POOL_CALLERA kernel-mode process or driver attempted to perform an illegal memory allocation. The problem can often be traced to a bug in a driver or software.
0x00000050 (or) PAGE_FAULT_IN_NONPAGED_AREAA hardware driver or system service requested data that was not in memory. The cause may be defective physical memory or incompatible software, especially remote control and antivirus programs.
0x0000000A (or) IRQL_NOT_LESS_OR_EQUALA kernel-mode process or driver attempted to access a memory location without authorization. This Stop error is typically caused by faulty or incompatible hardware or software.
0x000000D1 (or) DRIVER_IRQL_NOT_OR_EQUALProbably the most common BSOD ! Occurs when a driver has illegally accessed a memory location while NT is operating at a specific IRQL.

How to fix the Windows 10 Stop Error 0x000000ed:

Boot in a safe Mode:

If Windows Wouldn’t start because of Blue Screen errors. In safe mode, Windows will only load the essential drivers.so if a driver recently installed is causing the Blue Screen of Error.Booting into safe mode is trying to fix the problem. As the computer is booting, Repeatedly press the F8 Key then Windows boot menu appears. This process is in a detailed way

  • Hold to shift and press F8 button upon startup to recovery mode
  • Then open the Window Select the Advanced repair option, Press Troubleshoot and select Advanced Options.
  • Click Windows Startup settings and press restart
Boot in safe mode

Boot in safe mode

Select a safe mode With a networking to boot into a stripped down version of Windows.This is a allow to access your Device Manager, The Internet, and Other System Tools.

Scan for malware:

Sometimes Viruses and malware are the root cause of Blue screen problem.These are will dig into your system registry and cause Instability. The buggy software very harmful and cause your computer to crash.If it can solve you have to install the latest anti-virus software and full fill the system scan to find anything that could be causing the problem.

Anti virus

Antivirus

Repair to Installation Windows:

This is an alternative way to complete the reinstalling Windows, as it only copies the system files to computer. This is useful if an essential file has become corrupt and is causing your computer to fail.

Repair Windows

Repair Windows

To perform a repair installation, Insert your Windows Disc and Boot menu from it.In the setup menu select a Repair installation.Windows will delete old ones and copy new ones.So you will not lose any personal data.

Roll Back your Drivers

A driver is a software that allows your computer to communicate with hardware.An incorrectly installed driver is often the cause of blue screen errors.Download the latest drivers for your computer’s hardware from the official manufacturer’s websites and install them.

Drivers
  • Open the Device Manager and select My Computer after that press on properties.
  • Select the hardware that you want to expand the rollback. you may have to expand categories to find it.
  • After that right click on the Icon and select properties.Then click the driver tab and select Roll back driver and confirm that you want to roll it back.
  • Once your drivers have been rolled back. Then your computer to verify the error doesn’t occur again.Don’t update the Driver again because new versions are released.

Roll Back Windows Update:

If rolling back the driver did not fix the problem.Consider restoring to an older, Working installation of Windows.this will let you determine if the Windows update is responsible to the blue screen.

Windows update

Windows update

  • Open a system restore. you can find system restore in the search bar into the start menu.
  • open the program, and select a date from the calendar before you started experiencing Errors.
  • This will reset all of the updates and be setting to that date, Effectively removing the updates added afterward.
  • use this to determine if a specific Windows update is caused your malfunction.

Clear disk cleanup:

If Windows Doesn’t have enough space on the Disk it is installed on, it can cause system failures.Remove unnecessary files and programs.If you have less than 15% of your hard Disk free.

Disk cleanup

Disk cleanup

Apply new Updates and Drivers:

if Rolling Back Drivers and Updates did n’t fix the problem then installing the latest versions and Updates may fix your problem. Check your Windows Update program to see if there are any new system and Hardware Updates available.

Open the control panel through the start menu and search for Windows Update. Then it will be opened.

Windows Update

Windows Update

Reinstall Windows:

If you have tried all the above options without success.You may have to reinstall Windows.This will completely remove all of your system software and replace it with a new fresh system.Make sure that all of your Important Files backup before doing the reinstallation.As your hard drive will be formatted for the installation process.

Reinstallation

Reinstallation

Replace Damaged hardware:

If your Driver and update don’t solve your problem.you may need to remove and replace your Hardware. Replacing anything other than RAM and Harddrive can be difficult and expensive.

For More Info Microsoft Live chat support

Microsoft chat support, Microsoft live support, Microsoft live chat support, Microsoft support live chat, Microsoft live support chat, Live support chat, Windows support chat, Windows chat support, Windows tech support chat, Windows live support chat,Microsoft excel not responding, Microsoft outlook is not responding, Outlook is not responding, Microsoft word and excel not responding

Error 0x00000050,Error 0x00000024,Error0x000000d1,Error 0x0000001eError 0x000000ed,Error 0x0000007F,Error 0x000000c2,Error 0x0000000a,Error 0xc000021a

Blue screen Error 0x0000001e in Windows 10/8/7

Error 0x0000001e in Windows 10 or any previous Windows operating system is also called as stop error or blue screen error. There are several scenarios your computer may get this error 0x0000001e.

scenario -1: When your computer running any old version of Windows operating systems like Window 8 or Windows 7 and you are trying to upgrade to window 10.

Scenatio-2: When you update any software package from pending updates.

Scenaro-3: This is a rare case where you see this blue screen stop error 0x0000001e in regular use.

More about Error 0x0000001e in Windows 10/8/7:

Stop Errors are also called sometimes Blue screen (or)Black screen of Errors.These stop Errors are applicable to all version of Windows like 10/8/7…These Errors can be caused by both the software and hardware Issues and it can be difficult to troubleshoot the problem.Blue screen of death appears when Microsoft Windows Encounters a critical Error 0x0000001e from which it can’t recover, Usually the low level of software crashes and faulty hardware.To fix the Stop Error 0x0000001e in Windows, you will diagnose the problem by testing common culprits like RAM, Hard drive, and temperature.Depending on the problem you may need to run a virus scan, clean up the hard disk, perform a repair installation etc.,

 

Error 0x0000001e

Blue screen Error 0x0000001e

Windows Stop Error codes list (or) Blue screen of DeathDescription of Error codes
0XC000021A (or) STATUS_SYSTEM_PROCESS_TERMINATEDOccurs if there is a serious security problem with Windows. A subsystem, such as Winlogon or the CSRSS is compromised; or due to a mismatch in system files;
0X000000EA (or) THREAD_STUCK_IN_DEVICE_DRIVERould occur after you install a new video adapter or an updated (and poorly written) video driver.
0XC00000221 (or) STATUS_IMAGE_CHECKSUM_MISMATCHThis indicates a damaged page file; or disk or file corruption; or a faulty hardware. The error will indicate the exact nature and the name of the damaged system file.
0x000000D8 (or) DRIVER_USED_EXCESSIVE_PTESThis indicated that a poorly written driver is causing your computer to request large amounts of kernel memory.
0x0000007F (or) UNEXPECTED_KERNEL_MODE_TRAPMost likely due to a Hardware failure, like defective memory chips, mismatched memory modules, a malfunctioning CPU, or a failure in your fan or power supply are the probable reasons for this BSOD
0x00000077 (or) KERNEL_STACK_INPAGE_ERRORThe system has attempted to read kernel data from virtual memory (the page file) and failed to find the data at the specified memory address
0x0000003F (or) NO_MORE_SYSTEM_PTES cause of this relatively uncommon error may be an out-of-control backup program or a buggy device driver.
0x0000002E (or) DATA_BUS_ERRORdefective physical memory (including memory used in video adapters) is the most common cause of this Stop error
0x00000024 (or) NTFS_FILE_SYSTEMA problem occurred within the NTFS file-system driver. A similar Stop error, 0x23, exists for FAT32 drives. The most likely cause is a hardware failure in a disk or disk controller.
0x0000001E (or) KMODE_EXCEPTION_NOT_HANDLEDThe Windows kernel detected an illegal or unknown processor instruction, often the result of invalid memory and access violations caused by faulty drivers or hardware devices.
OX000000ED (or) UNMOUNTABLE_BOOT_VOLUMEif you get this message while updating TO Vista, check that you have compatible drivers for the disk controller and also re-check the drive cabling, and ensure that it is configured properly
0x000000C2 (or) BAD_POOL_CALLERA kernel-mode process or driver attempted to perform an illegal memory allocation. The problem can often be traced to a bug in a driver or software.
0x00000050 (or) PAGE_FAULT_IN_NONPAGED_AREAA hardware driver or system service requested data that was not in memory. The cause may be defective physical memory or incompatible software, especially remote control and antivirus programs.
0x0000000A (or) IRQL_NOT_LESS_OR_EQUALA kernel-mode process or driver attempted to access a memory location without authorization. This Stop error is typically caused by faulty or incompatible hardware or software.
0x000000D1 (or) DRIVER_IRQL_NOT_OR_EQUALProbably the most common BSOD ! Occurs when a driver has illegally accessed a memory location while NT is operating at a specific IRQL.

How to fix the Windows Stop Error 0x0000001e:

Boot in a safe Mode:

If Windows Wouldn’t start because of Blue Screen errors. In safe mode, Windows will only load the essential drivers.so if a driver recently installed is causing the Blue Screen of Error.Booting into safe mode is trying to fix the problem. As the computer is booting, Repeatedly press the F8 Key then Windows boot menu appears. This process is in a detailed way

  • Hold to shift and press F8 button upon startup to recovery mode.
  • Then open the Window Select the Advanced repair option, Press Troubleshoot and select Advanced Options.
  • Click Windows Startup settings and press restart
Boot in safe mode

Boot in safe mode

Select a safe mode With a networking to boot into a stripped down version of Windows.This is a allow to access your Device Manager, The Internet, and Other System Tools.

Scan for malware:

Sometimes Viruses and malware are the root cause of Blue screen problem.These are will dig into your system registry and cause Instability. The buggy software very harmful and cause your computer to crash.If it can solve you have to install the latest anti-virus software and full fill the system scan to find anything that could be causing the problem.

Anti virus

Antivirus

Repair to Installation Windows:

This is an alternative way to complete the reinstalling Windows, as it only copies the system files to computer. This is useful if an essential file has become corrupt and is causing your computer to fail.

Repair Windows

To perform a repair installation, Insert your Windows Disc and Boot menu from it.In the setup menu select a Repair installation.Windows will delete old ones and copy new ones.So you will not lose any personal data.

Roll Back your Drivers

A driver is a software that allows your computer to communicate with hardware.An incorrectly installed driver is often the cause of blue screen errors.Download the latest drivers for your computer’s hardware from the official manufacturer’s websites and install them.

Drivers
  • Open the Device Manager and select My Computer after that press on properties.
  • Select the hardware that you want to expand the rollback. you may have to expand categories to find it.
  • After that right click on the Icon and select properties.Then click the driver tab and select Roll back driver and confirm that you want to roll it back.
  • Once your drivers have been rolled back. Then your computer to verify the error doesn’t occur again.Don’t update the Driver again because new versions are released.

Roll Back Windows Update:

If rolling back the driver did not fix the problem.Consider restoring to an older, Working installation of Windows.this will let you determine if the Windows update is responsible to the blue screen.

Windows update
  • Open a system restore. you can find system restore in the search bar into the start menu.
  • open the program, and select a date from the calendar before you started experiencing Errors.
  • This will reset all of the updates and be setting to that date, Effectively removing the updates added afterward.
  • use this to determine if a specific Windows update is caused your malfunction.

Clear disk cleanup:

If Windows Doesn’t have enough space on the Disk it is installed on, it can cause system failures.Remove unnecessary files and programs.If you have less than 15% of your hard Disk free.

Disk cleanup

Apply new Updates and Drivers:

if Rolling Back Drivers and Updates did n’t fix the problem then installing the latest versions and Updates may fix your problem. Check your Windows Update program to see if there are any new system and Hardware Updates available.

Open the control panel through the start menu and search for Windows Update. Then it will be opened.

Windows Update

Reinstall Windows:

If you have tried all the above options without success.You may have to reinstall Windows.This will completely remove all of your system software and replace it with a new fresh system.Make sure that all of your Important Files backup before doing the reinstallation.As your hard drive will be formatted for the installation process.

Reinstallation

Replace Damaged hardware:

If your Driver and update don’t solve your problem.you may need to remove and replace your Hardware. Replacing anything other than RAM and Harddrive can be difficult and expensive.

For More Info Microsoft Live chat support

Microsoft chat support, Microsoft live support, Microsoft live chat support, Microsoft support live chat, Microsoft live support chat, Live support chat, Windows support chat, Windows chat support, Windows tech support chat, Windows live support chat,Microsoft excel not responding, Microsoft outlook is not responding, Outlook is not responding, Microsoft word and excel not responding

Error 0x00000050,Error 0x00000024,Error0x000000d1,Error 0x0000001eError 0x000000ed,Error 0x0000007F,Error 0x000000c2,Error 0x0000000a,Error 0xc000021a

 

Windows Stop Error 0x000000d1 in Windows 7/8/10

Error 0x000000d1 in windows 10 or any previous Windows operating system is also called as stop error or blue screen error. There are several scenarios your computer may get this error 0x000000d1.

scenario -1: When your computer running any old version of Windows operating system like Window 8 or Windows 7 and you are trying to upgrade to window 10.

Scenatio-2: When you update any software package from pending updates.

Scenaro-3: This is a rare case where you see this blue screen stop error ox000000d1 in regular use.

More about Error 0x000000d1 in Windows 10/8/7:

Stop Errors are also called sometimes Blue screen (or)Black screen of Errors.These stop Errors are applicable to all version of Windows like 10/8/7…These Errors can be caused by both the software and hardware Issues and it can be difficult to troubleshoot the problem.Blue screen of death appears when Microsoft Windows Encounters a critical Error 0x000000d1 from which it can’t recover, Usually the low level of software crashes and faulty hardware.To fix the Stop Error 0x000000d1 in Windows, you will diagnose the problem by testing common culprits like RAM, Hard drive, and temperature.Depending on the problem you may need to run a virus scan, clean up the hard disk, perform a repair installation etc.,

 

Error 0x000000d1

Windows Stop Error 0x000000d1

Windows Stop Error codes list (or) Blue screen of DeathDescription of Error codes
0XC000021A (or) STATUS_SYSTEM_PROCESS_TERMINATEDOccurs if there is a serious security problem with Windows. A subsystem, such as Winlogon or the CSRSS is compromised; or due to a mismatch in system files;
0X000000EA (or) THREAD_STUCK_IN_DEVICE_DRIVERould occur after you install a new video adapter or an updated (and poorly written) video driver.
0XC00000221 (or) STATUS_IMAGE_CHECKSUM_MISMATCHThis indicates a damaged page file; or disk or file corruption; or a faulty hardware. The error will indicate the exact nature and the name of the damaged system file.
0x000000D8 (or) DRIVER_USED_EXCESSIVE_PTESThis indicated that a poorly written driver is causing your computer to request large amounts of kernel memory.
0x0000007F (or) UNEXPECTED_KERNEL_MODE_TRAPMost likely due to a Hardware failure, like defective memory chips, mismatched memory modules, a malfunctioning CPU, or a failure in your fan or power supply are the probable reasons for this BSOD
0x00000077 (or) KERNEL_STACK_INPAGE_ERRORThe system has attempted to read kernel data from virtual memory (the page file) and failed to find the data at the specified memory address
0x0000003F (or) NO_MORE_SYSTEM_PTES cause of this relatively uncommon error may be an out-of-control backup program or a buggy device driver.
0x0000002E (or) DATA_BUS_ERRORdefective physical memory (including memory used in video adapters) is the most common cause of this Stop error
0x00000024 (or) NTFS_FILE_SYSTEMA problem occurred within the NTFS file-system driver. A similar Stop error, 0x23, exists for FAT32 drives. The most likely cause is a hardware failure in a disk or disk controller.
0x0000001E (or) KMODE_EXCEPTION_NOT_HANDLEDThe Windows kernel detected an illegal or unknown processor instruction, often the result of invalid memory and access violations caused by faulty drivers or hardware devices.
OX000000ED (or) UNMOUNTABLE_BOOT_VOLUMEif you get this message while updating TO Vista, check that you have compatible drivers for the disk controller and also re-check the drive cabling, and ensure that it is configured properly
0x000000C2 (or) BAD_POOL_CALLERA kernel-mode process or driver attempted to perform an illegal memory allocation. The problem can often be traced to a bug in a driver or software.
0x00000050 (or) PAGE_FAULT_IN_NONPAGED_AREAA hardware driver or system service requested data that was not in memory. The cause may be defective physical memory or incompatible software, especially remote control and antivirus programs.
0x0000000A (or) IRQL_NOT_LESS_OR_EQUALA kernel-mode process or driver attempted to access a memory location without authorization. This Stop error is typically caused by faulty or incompatible hardware or software.
0x000000D1 (or) DRIVER_IRQL_NOT_OR_EQUALProbably the most common BSOD ! Occurs when a driver has illegally accessed a memory location while NT is operating at a specific IRQL.

How to fix the Windows Stop Error 0x000000d1:

Boot in a safe Mode:

If Windows Wouldn’t start because of Blue Screen errors. In safe mode, Windows will only load the essential drivers.so if a driver recently installed is causing the Blue Screen of Error.Booting into safe mode is trying to fix the problem. As the computer is booting, Repeatedly press the F8 Key then Windows boot menu appears. This process is in a detailed way

  • Hold to shift and press F8 button upon startup to recovery mode
  • Then open the Window Select the Advanced repair option, Press Troubleshoot and select Advanced Options.
  • Click Windows Startup settings and press restart
Boot in safe mode

Boot in safe mode

Select a safe mode With a networking to boot into a stripped down version of Windows.This is a allow to access your Device Manager, The Internet, and Other System Tools.

Scan for malware:

Sometimes Viruses and malware are the root cause of Blue screen problem.These are will dig into your system registry and cause Instability. The buggy software very harmful and cause your computer to crash.If it can solve you have to install the latest anti-virus software and full fill the system scan to find anything that could be causing the problem.

Anti virus

Antivirus

Repair to Installation Windows:

This is an alternative way to complete the reinstalling Windows, as it only copies the system files to computer. This is useful if an essential file has become corrupt and is causing your computer to fail.

Repair Windows

To perform a repair installation, Insert your Windows Disc and Boot menu from it.In the setup menu select a Repair installation.Windows will delete old ones and copy new ones.So you will not lose any personal data.

Roll Back your Drivers

A driver is a software that allows your computer to communicate with hardware.An incorrectly installed driver is often the cause of blue screen errors.Download the latest drivers for your computer’s hardware from the official manufacturer’s websites and install them.

Drivers
  • Open the Device Manager and select My Computer after that press on properties.
  • Select the hardware that you want to expand the rollback. you may have to expand categories to find it.
  • After that right click on the Icon and select properties.Then click the driver tab and select Roll back driver and confirm that you want to roll it back.
  • Once your drivers have been rolled back. Then your computer to verify the error doesn’t occur again.Don’t update the Driver again because new versions are released.

Roll Back Windows Update:

If rolling back the driver did not fix the problem.Consider restoring to an older, Working installation of Windows.this will let you determine if the Windows update is responsible to the blue screen.

Windows update
  • Open a system restore. you can find system restore in the search bar into the start menu.
  • open the program, and select a date from the calendar before you started experiencing Errors.
  • This will reset all of the updates and be setting to that date, Effectively removing the updates added afterward.
  • use this to determine if a specific Windows update is caused your malfunction.

Clear disk cleanup:

If Windows Doesn’t have enough space on the Disk it is installed on, it can cause system failures.Remove unnecessary files and programs.If you have less than 15% of your hard Disk free.

Disk cleanup

Apply new Updates and Drivers:

if Rolling Back Drivers and Updates did n’t fix the problem then installing the latest versions and Updates may fix your problem. Check your Windows Update program to see if there are any new system and Hardware Updates available.

Open the control panel through the start menu and search for Windows Update. Then it will be opened.

Windows Update

Reinstall Windows:

If you have tried all the above options without success.You may have to reinstall Windows.This will completely remove all of your system software and replace it with a new fresh system.Make sure that all of your Important Files backup before doing the reinstallation.As your hard drive will be formatted for the installation process.

Reinstallation

Replace Damaged hardware:

If your Driver and update don’t solve your problem.you may need to remove and replace your Hardware. Replacing anything other than RAM and Harddrive can be difficult and expensive.

For More Info Microsoft Live chat support

Microsoft chat support, Microsoft live support, Microsoft live chat support, Microsoft support live chat, Microsoft live support chat, Live support chat, Windows support chat, Windows chat support, Windows tech support chat, Windows live support chat,Microsoft excel not responding, Microsoft outlook is not responding, Outlook is not responding, Microsoft word and excel not respondingError 0x00000050,Error 0x00000024,Error0x000000d1,Error 0x0000001eError 0x000000ed,Error 0x0000007F,Error 0x000000c2,Error 0x0000000a,Error 0xc000021aError code 30016-4,windows tech support live chat

Blue Screen Error 0x00000024 Windows 10/8/7

Error 0x00000024 in Windows 10 or any previous Windows operating system is also called as stop error or blue screen error. There are several scenarios your computer may get this error 0x00000024.

scenario -1: When your computer running any old version of Windows operating systems like Window 8 or Windows 7 and you are trying to upgrade to window 10.

Scenatio-2: When you update any software package from pending updates.

Scenaro-3: This is a rare case where you see this blue screen stop error ox00000024 in regular use.

More about Error 0x00000024 in Windows 10/8/7:

Stop Errors are also called sometimes Blue screen (or)Black screen of Errors.These stop Errors are applicable to all version of Windows like 10/8/7…These Errors can be caused by both the software and hardware Issues and it can be difficult to troubleshoot the problem.Blue screen of death appears when Microsoft Windows Encounters a critical Error 0x00000024 from which it can’t recover, Usually the low level of software crashes and faulty hardware.To fix the Stop Error 0x00000024 in Windows, you will diagnose the problem by testing common culprits like RAM, Hard drive, and temperature.Depending on the problem you may need to run a virus scan, clean up the hard disk, perform a repair installation etc.,

Error 0x00000024

Windows stop error 0x00000024

 

Windows Stop Error codes list (or) Blue screen of DeathDescription of Error codes
0XC000021A (or) STATUS_SYSTEM_PROCESS_TERMINATEDOccurs if there is a serious security problem with Windows. A subsystem, such as Winlogon or the CSRSS is compromised; or due to a mismatch in system files;
0X000000EA (or) THREAD_STUCK_IN_DEVICE_DRIVERould occur after you install a new video adapter or an updated (and poorly written) video driver.
0XC00000221 (or) STATUS_IMAGE_CHECKSUM_MISMATCHThis indicates a damaged page file; or disk or file corruption; or a faulty hardware. The error will indicate the exact nature and the name of the damaged system file.
0x000000D8 (or) DRIVER_USED_EXCESSIVE_PTESThis indicated that a poorly written driver is causing your computer to request large amounts of kernel memory.
0x0000007F (or) UNEXPECTED_KERNEL_MODE_TRAPMost likely due to a Hardware failure, like defective memory chips, mismatched memory modules, a malfunctioning CPU, or a failure in your fan or power supply are the probable reasons for this BSOD
0x00000077 (or) KERNEL_STACK_INPAGE_ERRORThe system has attempted to read kernel data from virtual memory (the page file) and failed to find the data at the specified memory address
0x0000003F (or) NO_MORE_SYSTEM_PTES cause of this relatively uncommon error may be an out-of-control backup program or a buggy device driver.
0x0000002E (or) DATA_BUS_ERRORdefective physical memory (including memory used in video adapters) is the most common cause of this Stop error
0x00000024 (or) NTFS_FILE_SYSTEMA problem occurred within the NTFS file-system driver. A similar Stop error, 0x23, exists for FAT32 drives. The most likely cause is a hardware failure in a disk or disk controller.
0x0000001E (or) KMODE_EXCEPTION_NOT_HANDLEDThe Windows kernel detected an illegal or unknown processor instruction, often the result of invalid memory and access violations caused by faulty drivers or hardware devices.
OX000000ED (or) UNMOUNTABLE_BOOT_VOLUMEif you get this message while updating TO Vista, check that you have compatible drivers for the disk controller and also re-check the drive cabling, and ensure that it is configured properly
0x000000C2 (or) BAD_POOL_CALLERA kernel-mode process or driver attempted to perform an illegal memory allocation. The problem can often be traced to a bug in a driver or software.
0x00000050 (or) PAGE_FAULT_IN_NONPAGED_AREAA hardware driver or system service requested data that was not in memory. The cause may be defective physical memory or incompatible software, especially remote control and antivirus programs.
0x0000000A (or) IRQL_NOT_LESS_OR_EQUALA kernel-mode process or driver attempted to access a memory location without authorization. This Stop error is typically caused by faulty or incompatible hardware or software.
0x000000D1 (or) DRIVER_IRQL_NOT_OR_EQUALProbably the most common BSOD ! Occurs when a driver has illegally accessed a memory location while NT is operating at a specific IRQL.

How to fix the Windows Stop Error 0x00000024:

Boot in a safe Mode:

If Windows Wouldn’t start because of Blue Screen errors. In safe mode, Windows will only load the essential drivers.so if a driver recently installed is causing the Blue Screen of Error.Booting into safe mode is trying to fix the problem. As the computer is booting, Repeatedly press the F8 Key then Windows boot menu appears. This process is in a detailed way

  • Hold to shift and press F8 button upon startup to recovery mode.
  • Then open the Window Select the Advanced repair option, Press Troubleshoot and select Advanced Options.
  • Click Windows Startup settings and press restart
Boot in safe mode

Boot in safe mode

Select a safe mode With a networking to boot into a stripped down version of Windows.This is a allow to access your Device Manager, The Internet, and Other System Tools.

Scan for malware:

Sometimes Viruses and malware are the root cause of Blue screen problem.These are will dig into your system registry and cause Instability. The buggy software very harmful and cause your computer to crash.If it can solve you have to install the latest anti-virus software and full fill the system scan to find anything that could be causing the problem.

Anti virus

Antivirus

Repair to Installation Windows:

This is an alternative way to complete the reinstalling Windows, as it only copies the system files to computer. This is useful if an essential file has become corrupt and is causing your computer to fail.

Repair Windows

To perform a repair installation, Insert your Windows Disc and Boot menu from it.In the setup menu select a Repair installation.Windows will delete old ones and copy new ones.So you will not lose any personal data.

Roll Back your Drivers

A driver is a software that allows your computer to communicate with hardware.An incorrectly installed driver is often the cause of blue screen errors.Download the latest drivers for your computer’s hardware from the official manufacturer’s websites and install them.

Drivers
  • Open the Device Manager and select My Computer after that press on properties.
  • Select the hardware that you want to expand the rollback. you may have to expand categories to find it.
  • After that right click on the Icon and select properties.Then click the driver tab and select Roll back driver and confirm that you want to roll it back.
  • Once your drivers have been rolled back. Then your computer to verify the error doesn’t occur again.Don’t update the Driver again because new versions are released.

Roll Back Windows Update:

If rolling back the driver did not fix the problem.Consider restoring to an older, Working installation of Windows.this will let you determine if the Windows update is responsible to the blue screen.

Windows update
  • Open a system restore. you can find system restore in the search bar into the start menu.
  • open the program, and select a date from the calendar before you started experiencing Errors.
  • This will reset all of the updates and be setting to that date, Effectively removing the updates added afterward.
  • use this to determine if a specific Windows update is caused your malfunction.

Clear disk cleanup:

If Windows Doesn’t have enough space on the Disk it is installed on, it can cause system failures.Remove unnecessary files and programs.If you have less than 15% of your hard Disk free.

Disk cleanup

Apply new Updates and Drivers:

if Rolling Back Drivers and Updates did n’t fix the problem then installing the latest versions and Updates may fix your problem. Check your Windows Update program to see if there are any new system and Hardware Updates available.

Open the control panel through the start menu and search for Windows Update. Then it will be opened.

Windows Update

Reinstall Windows:

If you have tried all the above options without success.You may have to reinstall Windows.This will completely remove all of your system software and replace it with a new fresh system.Make sure that all of your Important Files backup before doing the reinstallation.As your hard drive will be formatted for the installation process.

Reinstallation

Replace Damaged hardware:

If your Driver and update don’t solve your problem.you may need to remove and replace your Hardware. Replacing anything other than RAM and Harddrive can be difficult and expensive.

For More Info Microsoft Live chat support

Microsoft chat support, Microsoft live support, Microsoft live chat support, Microsoft support live chat, Microsoft live support chat, Live support chat, Windows support chat, Windows chat support, Windows tech support chat, Windows live support chat,Microsoft excel not responding, Microsoft outlook is not responding, Outlook is not responding, Microsoft word and excel not respondinError 0x00000050,Error 0x00000024,Error0x000000d1,Error 0x0000001eError 0x000000ed,Error 0x0000007F,Error 0x000000c2,Error 0x0000000a,Error 0xc000021a